Publikationen

Suche


P. Mantzanas, T. Duerbaum (2017)
A Novel Detailed Analysis of the Flyback Converter Utilizing a Transformer with Nonlinear Magnetizing Inductance
PCIM Conference, May 2017, Nuremberg, Germany

E. Stenglein, M. Albach (2017)
A Novel Approach to Calculate the Reluctance of Air-Gaps in Ferrite Cores
PCIM Conference, May 2017, Nuremberg, Germany

A. Bucher, D. Kübrich, T. Dürbaum (2016)
Comprehensive Design Approach for a Two-Stage Fixed-Frequency Contactless Energy Transfer System Based on the Extended First Harmonic Approximation
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), September 2016, Karlsruhe, Germany

E. Stenglein, M. Albach (2016)
Analytical calculation method for the non-linear characteristic of ferrite-cored inductors with stepped air gap
Electrical Engineering -Archiv für Elektrotechnik, September 2016, doi:10.1007/s00202-016-0432-z

C. Oeder, M. Barwig, T. Dürbaum (2016)
Estimation of Switching Losses in Resonant Converters Based on Datasheet Information
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), September 2016, Karlsruhe, Germany

A. Pawellek, T. Dürbaum (2016)
LED-Ballasts in Lighting Applications – A Comparison of Cost Effective One Stage Topologies
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), September 2016, Karlsruhe, Germany

E. Stenglein, D. Kuebrich, M. Albach (2016)
Analytical Calculation of the Current Depending Inductance of a Stepped Air Gap Inductor
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), September 2016, Karlsruhe, Germany

E. Stenglein, M. Albach (2016)
The Reluctance of Large Air Gaps in Ferrite Cores
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), September 2016, Karlsruhe, Germany

H. Rossmanith, E. Stenglein, M. Albach (2016)
Prediction of the Leakage Inductance in High Frequency Transformers
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), September 2016, Karlsruhe, Germany

P. Mantzanas, M. Barwig, D. Kuebrich, T. Duerbaum (2016)
Efficiency Improvement of a Flyback Converter by Employing a Stepped Air-Gap Transformer
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), September 2016, Karlsruhe, Germany

E. Stenglein, D. Kuebrich, M. Albach (2016)
Prediction of the Non-linear Behavior of a Stepped Air Gap Inductor
17th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2016), June 2016, Trondheim, Norway

P. Mantzanas, M. Barwig, T. Duerbaum (2016)
Analytical Calculation of the Flyback Converter Utilizing a Transformer with Saturable Magnetizing Inductance
17th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2016), June 2016, Trondheim, Norway

J. Dobusch, C. Oeder, T. Duerbaum (2016)
A novel method to simulate the control-to-output transfer function of resonant converters
PCIM Conference, May 2016, Nuremberg, Germany

C. Oeder, M. Barwig, T. Duerbaum (2016)
Novel Method for the Estimation of Switching Losses in Resonant Converters
PCIM Conference, May 2016, Nuremberg, Germany

A. Pawellek, T. Duerbaum (2016)
Detailed Comparison of One Stage Topologies for LED Lighting Applications
PCIM Conference, May 2016, Nuremberg, Germany

P. Mantzanas, D. Kuebrich, M. Barwig, T. Duerbaum (2016)
Analysis of the Flyback Converter Utilizing a Transformer with Stepped Air-Gap
PCIM Conference, May 2016, Nuremberg, Germany

W. Hauser, M. Albach (2015)
Source Reconstruction From Near Field Scan Data of Stripline Structures
International Symposium on Antennas and Propagation (ISAP2015), November 2015, Hobart, Tasmania, Australia

A. Pawellek, T. Dürbaum (2015)
Analysis and Design of a Cost Effective One Stage Topology for LED Lighting Applications
EPE’15-ECCE Europe, September 2015, Geneva, Switzerland

J. Göttle, T. Dürbaum (2015)
A resonant single-stage PFC AC-DC converter
9th International Conference on Compatibility and Power Electronics (CPE), June 2015, Costa da Caparica, Portugal

A. Pawellek, T. Dürbaum (2015)
Novel Analysis of a Boost-Buck Single Stage LED-Ballast
PCIM Conference, May 2015, Nuremberg, Germany

E. Stenglein, C. Oeder, T. Duerbaum (2015)
Design of a Series Resonant Converter with Inductive Output Filter for 130 W Street Lighting Application
PCIM Conference, May 2015, Nuremberg, Germany

M. Schmidt, M. Albach (2015)
Reconstruction of Currents from EMC Near-Field Measurements by Means of Continuity Equation Constraints
IEEE Symposium on EMC&SI, March 2015, Santa Clara, California, USA

J. Göttle, T. Hieke, T. Dürbaum (2014)
Analysis and Optimization of the Asymmetrical Half-Bridge PWM Converter
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

M. Barwig, C. Oeder, T. Duerbaum (2014)
Analysis and Design of a Partial-Multi-Resonant LLC Converter
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

J. Binder, C. Oeder, M. Barwig, T. Duerbaum (2014)
Influence of Component Tolerances onto Design and Losses of Resonant LLC Converters
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

A. Pawellek, T. Dürbaum (2014)
Analysis and Design of a Boost-Buck Single Stage Topology for LED Lighting Applications
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

M. Schmidt, M. Albach (2014)
The advantages of spatial domain probe compensation technique in EMC near-field measurements
International Symposium on Electromagnetic Compatibility, May 2014, Tokio, Japan

C. Oeder, T. Duerbaum (2014)
A Novel Method to Predict ZVS Behavior of LLC Converters
PCIM Conference, May 2014, Nuremberg, Germany

C. Oeder, J. Goettle, T. Duerbaum (2014)
Novel Improved Loss Prediction for Multi-Resonant Converter Optimization Based on the First-Harmonic-Approximation
PCIM Conference, May 2014, Nuremberg, Germany

J. Göttle, T. Hieke, T. Dürbaum (2014)
Detailed Analysis and Optimization of the Asymmetrical Half-Bridge PWM Converter including Parasitics
PCIM Conference, May 2014, Nuremberg, Germany

J. Stahl, M. Albach (2014)
Non-Ideal Smoothing Transformer for Effective Differential Mode Noise Reduction in an SMPS
IEEE Transactions on Power Electronics, vol. 29, no.6, S. 2774-2786

H. Tech, C. Oeder. D. Kuebrich, T. Duerbaum (2013)
Application specific efficiency improvement for an industrial point of load converter
IEEE Applied Power Electronics Conference and Exposition (APEC), March 2013, Long Beach, California, USA

C. Oeder, T. Duerbaum (2013)
ZVS Investigation of LLC Converters Based on FHA Assumptions
IEEE Applied Power Electronics Conference and Exposition (APEC), March 2013, Long Beach, California, USA

M. Schmidt, M. Albach (2013)
Die Vorzüge der Sondenkompensation im Ortsbereich bei EMV Nahfeldmessungen
Kleinheubacher Tagung, September 2013, Miltenberg, Deutschland

M. Albach, H. Roßmanith, D. Kübrich (2013)
EMV in Theorie und Praxis
VDI Wissensforum, Frankfurt, 21.-22. Februar und Stuttgart, 25.-26. Juni 2013

M. Albach, A. Stadler (2013)
Cluster-Schulung: Induktivitäten in der Leistungselektronik
Cluster Leistungselektronik im ECPE e.V., Nürnberg, 23.-24. Juli und 26.-27. September 2013

M. Albach, H. Roßmanith, W. Hauser (2013)
Wicklungen - besser auslegen statt besser kühlen
Elektronik Components, September 2013, S. 35-39

J. Stahl, S. Wieczorek, M. Schmidt, M. Albach (2013)
Passive Cancellation in a Flyback for Effective CM Reduction
IEEE Energy Conversion Congress & Exposition (ECCE), September 2013, Denver, Colorado, USA

M. Schmidt, J. Stahl, M. Albach (2013)
Important Aspects on Effective Common Mode Noise Filtering by Means of Passive Cancellation
IEEE Applied Power Electronics Conference and Exposition (APEC), March 2013, Long Beach, California, USA

M. Schmidt, J. Stahl, M. Albach (2013)
Effective Common Mode Noise Filtering by Means of Passive Cancellation: Some Important Aspects
PCIM Conference, May 2013, Nuremberg, Germany

J. Stahl, T. Hieke, C. Oeder, T. Duerbaum (2013)
Small Signal Analysis of the Resonant LLC Converter
IEEE Energy Conversion Congress & Exposition Asia (ECCE Asia), June 2013, Melbourne, Australia

J. Stahl, S. Wieczorek, M. Schmidt, M. Albach (2013)
Effective CM Reduction in a Flyback by means of Passive Cancellation
IEEE Energy Conversion Congress & Exposition Asia (ECCE Asia), June 2013, Melbourne, Australia

A. Leicht, J. Fischer, M. Albach (2013)
Novel approach to describe the material functions of the Hodgdon Model to match the hysteresis behavior of silicon iron 6.5 %
PCIM Conference, May 2013, Nuremberg, Germany

H. Tech, C. Oeder, T. Duerbaum (2013)
A Novel Optimization Strategy for Point of Load Converters
PCIM Conference, May 2013, Nuremberg, Germany

E. Stenglein, C. Oeder, T. Duerbaum (2013)
A Novel Detailed Analysis of the Series Resonant Converter with Inductive Output Filter
PCIM Conference, May 2013, Nuremberg, Germany

J. Stahl, E. Stenglein, M. Albach (2013)
Automated EMI Measurement Set-up Comprising CM and DM Measurements with a Modified LISN
PCIM Conference, May 2013, Nuremberg, Germany

H. Rossmanith, M. Albach, J. Fischer, A. Stadler (2013)
Improved characterization of the magnetic properties of hexagonally packed wires
EPE Journal, Vol. 22, Nr. 4, S. 5-10

M. Albach (2013)
Strategies to reduce EMC Problems in Power Electronic Circuits
Micromaterials and Nanomaterials, Fraunhofer ENAS, Heft 14/12, S. 30 - 34

A. Bucher, T. Duerbaum (2012)
Analysis and Design of a Contactless Power Transmission System Based on the Extended First Harmonic Approximation
IEEE Industrial Application Society (IAS) Annual Meeting, Oktober 2012, Las Vegas, USA

A. Leicht, J. Fischer, M. Albach (2012)
A Polynomial Approach applied to the Hodgdon Model to describe the Hysteresis Loops of SiFe
IEEE International Conference on Electromagnetics in Advanced Applications (ICEAA), September 2012,
Cape Town, South Africa

J. Stahl, R. Junghaenel, M. Albach (2012)
Non-Ideal Smoothing Transformer as Effective Differential Mode Filter
IEEE Energy Conversion Congress & Exposition (ECCE), September 2012, Raleigh, USA

J. Stahl, H. Steuer, T. Duerbaum (2012)
Discrete Modeling of Resonant Converters – Steady State and Small Signal Description
IEEE Energy Conversion Congress & Exposition (ECCE), September 2012, Raleigh, USA

M. Albach, H. Rossmanith, D. Exner (2012)
Litzen im Vergleich
Elektronik Components, August 2012, S. 32 - 36

J. Stahl, T. Duerbaum (2012)
Steady State and Small Signal Modeling of Resonant Converters – Practical Validation
13th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2012), Juni 2012, Kyoto, Japan

A. Pawellek, J. Stahl, A. Fetzer, M. Albach (2012)
Effective Measurement Set-up to Determine the Inductivity of Nonlinear Inductances as a Function of the Inductor Current
13th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2012), Juni 2012, Kyoto, Japan

A. Pawellek, M. Weinmann, T. Duerbaum (2012)
Development of a Wireless Dimmable CFL for Domestic Application on the Basis of Bluetooth Technology
PCIM Conference, May 2012, Nuremberg, Germany

C. Oeder, T. John, T. Duerbaum (2012)
Arbitrary Load Profile Emulator Based on a µC Controlled Switchable Resistor Network
PCIM Conference, May 2012, Nuremberg, Germany

C. Oeder, A. Bucher, T. Duerbaum (2012)
Comparison of Output Rectifier Topologies in Case of a Low-Profile LLC Converter
PCIM Conference, May 2012, Nuremberg, Germany

A. Pawellek, C. Oeder, T. Duerbaum (2012)
Resonant LLC and LCC Converter – Comparison Based on an Identical Hardware Set-Up
PCIM Conference, May 2012, Nuremberg, Germany

M. Schmidt, J. Stahl, M. Albach (2012)
Analysis of parasitic effects on passive compensation of common mode noise in a boost converter
PCIM Conference, May 2012, Nuremberg, Germany

J. Göttle, D. Kübrich, T. Dürbaum (2012)
Power loss measurement using a fast and accurate open calorimeter
PCIM Conference, May 2012, Nuremberg, Germany

A. Leicht, M. Albach, M. Spang, D. Kübrich (2012)
Analytical Calculation of the Current Sharing in Copper Coils with Parallel Windings
PCIM Conference, May 2012, Nuremberg, Germany

J. Stahl, T. Dürbaum (2012)
Discrete Modeling of Resonant Converters – Practical Validation
PCIM Conference, May 2012, Nuremberg, Germany

J. Stahl, R. Junghaenel, M. Albach (2012)
Smoothing Transformer for Differential Mode Noise Reduction
PCIM Conference, May 2012, Nuremberg, Germany

M. Albach, J. Fischer (2012)
Elektrotechnik - Aufgabensammlung mit Lösungen
Pearson Verlag, 378 Seiten, ISBN 978-3-86894-070-1

Best Student Paper Award
M. Schmidt, J. Stahl, M. Albach (2012)
Interaction between Passive Common Mode Noise Cancellation and Conservative Passive Filtering
2012 Asia-Pacific EMC-Symposium in SINGAPORE, May 21-24, 2012

J. Stahl, R. Junghaenel, M. Schmidt, M. Albach (2012)
Smoothing Transformer as Effective Differential Mode Filter
2012 Asia-Pacific EMC-Symposium in SINGAPORE, May 21-24, 2012

M. Albach (2012)
Induktive Komponenten in der Leistungselektronik
Vortrag im Rahmen des Institutskolloquiums des Elektrotechnischen Institutes der Universität Karlsruhe, 06.02.2012

M. Schmidt, J. Stahl, M. Albach (2012)
Influence of Parasitic Effects on Passive Cancellation of Common Mode Noise in a Boost Converter
IEEE Applied Power Electronics Conference and Exposition (APEC), 5.–9. Februar 2012, Orlando, Florida, USA

D. Kuebrich, J. Goettle, T. Duerbaum (2012)
Power Loss Measurement based on Transient Temperature Rise
IEEE Applied Power Electronics Conference and Exposition (APEC), 5.–9. Februar 2012, Orlando, Florida, USA

H. Rossmanith, M. Doebroenti, M. Albach, D. Exner (2011)
Measurement and Characterization of High Frequency Losses in Nonideal Litz Wires
IEEE Transactions on Power Electronics, Nov. 2011, Volume 26, Nr. 11, S. 3386 - 3394

M. Albach (2011)
Grundlagen und Dimensionierung von Induktivitäten
Vortrag im Rahmen des Cluster-Seminars "Induktivitäten in der Leisungselektronik", 05.-06. Oktober 2011, Nürnberg

S. Teuber, A. Bucher, T. Dürbaum (2011)
Industrie-Schaltnetzgeräte im Test – Teil 3: elektromagnetische Eigenschaften
Elektronik 15/2011, S. 38-42

S. Teuber, A. Bucher, T. Dürbaum (2011)
Industrie-Schaltnetzgeräte im Test – Teil 2: dynamische Eigenschaften
Elektronik 13/2011, S. 34-39

S. Teuber, A. Bucher, T. Dürbaum (2011)
Industrie-Schaltnetzgeräte im Test – Teil 1: stationäre Eigenschaften
Elektronik 11/2011, S. 48-54

A. Pawellek, C. Oeder, J. Stahl, T. Duerbaum (2011)
The Resonant LLC vs. LCC Converter – Comparing Two Optimized Prototypes
Energy Conversion Congress and Exposition (ECCE), September 2011, Phoenix, USA

J. Stahl, D. Kuebrich, A. Pawellek, C. Oeder, T. Duerbaum (2011)
Automatic Measurement of the Reverse Recovery Behavior of Ultra-Fast Diodes
Energy Conversion Congress and Exposition (ECCE), September 2011, Phoenix, USA

M. Albach (2011)
Elektrotechnik
Pearson Verlag, 629 Seiten, ISBN 978-3-86894-081-7

H. Roßmanith, M. Albach, J. Patz, A. Stadler (2011)
Improved characterization of the magnetic properties of hexagonally packed wires
European Conference on Power Electronics and Applications (EPE), August 2011, Birmingham, UK

J. Stahl, D. Kuebrich, T. Duerbaum, A. Leicht, J. Patz (2011)
A Fully Automated Measurement Set-up for the Determination of the Reverse Recovery Behaviour of Ultra-Fast Diodes
European Conference on Power Electronics and Applications (EPE), August 2011, Birmingham, UK

A. Leicht, M. Albach, M. Spang, D. Kuebrich (2011)
Current Distribution in Copper Coils with Parallel Windings
European Conference on Power Electronics and Applications (EPE), August 2011, Birmingham, UK

A. Pawellek, C. Oeder, T. Duerbaum (2011)
Comparison of Resonant LLC and LCC Converters for Low-Profile Applications
European Conference on Power Electronics and Applications (EPE), August 2011, Birmingham, UK

M. Spang, M. Albach (2011)
Determination of the receiving characteristics of near-field probes by simulation of the fields in transmitting mode
CST European User Group Meeting, Mai 2011, Freising

M. Schmidt, T. Fischer, M. Albach (2011)
Analytical Prediction of the Effect of Conductive Planes on EMC Filter Structures
International Conference on Electromagnetics in Advanced Applications (ICEAA), September 2011, Torino, Italy

M. Albach (2011)
EMV in der Leistungselektronik
Vortrag im Rahmen des Seminars "Zuverlässigkeit moderner Systeme", Fraunhofer ENAS, Paderborn, 08.07.2011

M. Albach (2011)
Grundlagen der Elektrotechnik 2, 2. Auflage, Periodische und nicht periodische Signalformen
Pearson Studium, 295 Seiten, ISBN 978-3-86894-080-0

M. Albach, (2011)
Grundlagen der Elektrotechnik 1, 3. Auflage, Erfahrungssätze, Bauelemente, Gleichstromschaltungen
Pearson Studium, 349 Seiten, ISBN 978-3-86894-079-4

C. Oeder, A. Bucher, J. Stahl, T. Duerbaum, (2011)
Discrepancies Caused by Approximation Methods in Case of Resonant LLC Converters with Capacitive Output Filter
PCIM Conference, May 2011, Nuremberg, Germany

C. Oeder, A. Bucher, T. Duerbaum, (2011)
Low-Profile LLC Converter for Notebook Adapters
PCIM Conference, May 2011, Nuremberg, Germany

J. Stahl, D. Kübrich, T. Dürbaum, A. Gerfer, (2011)
Balancing Unit for Proper Characterization of a Modified LISN for Effective EMI Noise Separation
PCIM Conference, May 2011, Nuremberg, Germany

J. Stahl, A. Bucher, T. Dürbaum, (2011)
Output Impedance Calculation by Means of Sampled-Data Modeling
PCIM Conference, May 2011, Nuremberg, Germany

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Analysis and Design of a LCC Converter for Low-Profile Resonant Power Adapters
PCIM Conference, May 2011, Nuremberg, Germany

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Spannungsregler kleiner Leistung im Test – Teil 4: Dynamische Kenngrößen und elektromagnetische Verträglichkeit
Elektronik, Ausgabe 09/2011, p. 40 – 49

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Spannungsregler kleiner Leistung im Test - Teil 3: Messung statischer Kenngrößen
Elektronik, Ausgabe 07/2011, p. 20 - 25

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Spannungsregler kleiner Leistung im Test – Teil 2: Messung statischer Kenngrößen
Elektronik, Ausgabe 03/2011, p. 28 – 33

A. Pawellek, A. Bucher, T. Dürbaum, (2010)
Spannungsregler kleiner Leistung im Test – Teil 1: Grundlagen und Testfeld
Elektronik, Ausgabe 26/2010, p. 26 – 33

J. Stahl, D. Kuebrich, T. Duerbaum (2011)
Automated Test Set-up for Reverse Recovery Characterization of Ultrafast Diodes
IEEE Applied Power Electronics Colloquium (IAPEC), 18.–19. April 2011, Johor Bharu, Malaysia

J. Stahl, D. Kuebrich, T. Duerbaum, C. Oeder (2011)
Fully Automated Measurement Set-up for Ultra-Fast Recovery Diode Testing
IEEE Applied Power Electronics Conference and Exposition (APEC), 6.–10. März 2011, Fort Worth, Texas, USA

M. Albach (2011)
Induktive Komponenten in der Leistungselektronik
Vortrag im Rahmen der VDE Fachtagung - ETG Fachbereich Q1 "Leistungselektronik und Systemintegration",
Bad Nauheim, 13.04.2011

M. Albach (2010)
Minimale Funknetzstörungen durch optimierte Auslegung von Funknetzteilen
Vortrag im Rahmen des 5. Chemnitzer Seminar für Nanotechnologie, Nanomaterials und Nanoreliability,
Fraunhofer ENAS, Chemnitz, 13.10.2010

M. Albach (2010)
Die elektrischen und magnetischen Ersatzschaltbilder von Transformatoren
Vortrag im Rahmen des STS-Spezialseminars in Ludwigshafen-Bodman, 30.09.2010

Bosch, H. Roßmanith (Co-Autor) (2010)
Kraftfahrtechnisches Taschenbuch - Kapitel Elektrotechnik

A. Pawellek, A. Bucher, T. Dürbaum (2010)
Analysis and Design of a Resonant LCC Converter for Low-Profile Applications
IEEE Energy Conversion Congress and Exposition (ECCE 2010), 12 – 15 September 2010, Atlanta, USA

A. Pawellek (2010)
Low-profile Power Adapter Based on a Resonant LCC Converter
IEEE International Symposium on Industrial Electronics (ISIE 2010), 4 - 7 Juli 2010, Bari, Italy

J. Stahl, D. Kuebrich, T. Duerbaum (2010)
Modification and characterization of a standard LISN for effective EMI noise separation
International Conference on Electromagnetics in Advanced Applications (ICEAA 2010 - Offshore)

A. Bucher, T. Duerbaum, J. Stahl (2010)
Rapid simulation of multi-resonant LLCC converters with capacitive output filter based on an extended first harmonic approximation
Energy Conversion Congress and Exposition (ECCE), 2010 IEEE, Page(s): 4041 - 4048

J. Stahl, D. Kuebrich, T. Duerbaum (2010)
Characterisation of an effective EMI noise separation including a standard LISN
Electromagnetic Theory (EMTS), 2010 URSI International Symposium, Page(s): 13 - 16

J. Stahl, D. Kuebrich, A. Bucher, T. Duerbaum (2010)
Characterization of a modified LISN for effective separated measurements of common mode and differential mode EMI noise
Energy Conversion Congress and Exposition (ECCE), 2010 IEEE, Page(s): 935 – 941

M. Albach, M. Döbrönti, H. Roßmanith, D. Exner, A. Stadler (2010)
Wicklungsverluste in Spulen und Trafos aus HF-Litze
Elektronik Industrie, Oktober 2010, S.32-34, Hüthig Verlag

J. Stahl, A. Bucher, C. Oeder, T. Duerbaum (2010)
Sampled-Data Modeling Applied to Output Impedance Reveals Missing Term in State-Space Averaging
12th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2010), 28 - 30 Juni 2010, Boulder, Colorado

C. Oeder, A. Bucher, J. Stahl, T. Duerbaum (2010)
A Comparison of Different Design Methods for the LLC Converter with Capacitive Output Filter
12th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2010), 28 - 30 Juni 2010, Boulder, Colorado

C. Oeder (2010)
Analysis and Design of a Low-Profile LLC Converter
IEEE International Symposium on Industrial Electronics (ISIE 2010), 4 - 7 Juli 2010, Bari, Italy

Martin Schmidt (2010)
An Analytical Model to Predict the Influence of Conductive Planes on EMC Filter Structures
2nd IEEE Germany Student Conference, 20./21. Mai 2010, Hamburg

A. Bucher, T. Duerbaum (2010)
Extended First Harmonic Approximation in Case of LLCC Converters with Capacitive Output Filter
15th IEEE Mediterranean Electrotechnical Conference (MELECON), pp. 1303 – 1308

A. Pawellek, A. Bucher, T. Duerbaum (2010)
Resonant LCC Converter for Low-Profile Applications
15th IEEE Mediterranean Electrotechnical Conference (MELECON), pp. 1309 – 1314

M. Doebroenti, M. Schmid, T. Duerbaum (2010)
Matlab based fast and accurate Simulation of a Power Factor Corrector Switch Mode Power Supply in Boundary Conduction Mode with Valley Skipping
Twelfth IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2010), 28 - 30 Juni 2010, Boulder, Colorado

M. Schmid, M. Doebroenti, A. Bucher and T. Duerbaum (2010)
Method for the Fast and Accurate Simulation of Switch-Mode Power Supplies
International Power Electronics Conference IPEC, June 2010, Sapporo, Japan

M. Schmid, M. Doebroenti, A. Bucher and T. Duerbaum (2010)
Fast and Accurate Simulation Method for Switch-Mode Power Supplies
PCIM Conference, May 2010, Nuremberg, Germany

T. Fischer, G. Schubert, M. Albach (2010)
Influence of Adjacent Metal Cover Planes on EMC Filter Structures
IEICE Transactions on Communcations, Vol.E93-B, No.07, Jul. 2010

M. Albach, M. Döbrönti, H. Roßmanith, D. Exner, A. Stadler (2010)
Optimized Winding = Optimum in Power Efficiency

M. Albach, J. Patz, H. Roßmanith, D. Exner, A. Stadler (2010)
Optimale Wicklung = optimaler Wirkungsgrad
Elektronik Power, April 2010, S.38-46, Weka Verlag

M. Spang, M. Albach, G. Schubert (2010)
Calibration of Probes for EMC Near-Field Scanning
CST European User Group Meeting, April 2010, Darmstadt

A. Pawellek, A. Bucher, T. Duerbaum(2010)
Analysis and Design of a Low-Profile Resonant LCC Converter
Applied Power Electronics Conference (APEC), Palm Springs, USA

A. Bucher, T. Duerbaum (2010)
Rapid Simulation of Fourth-Order Multi-Resonant LLCC Converters with Capacitive Output Filter
Applied Power Electronics Conference (APEC), Palm Springs, USA

M. Spang, T. Stoeckel, G. Schubert, M. Albach (2010)
Application of Probes with Multiple Outputs on Probe-Compensated EMC Near-Field Measurements
International Conference on Industrial Technology (ICIT), March 2010, Viña del Mar, Chile

A. Stadler, M. Albach, A. Lindner (2010)
A practical method to measure electrical AC conductivity of MnZn ferrites using conventional toroids
IEEE Transactions on Magnetics, vol. 46, no. 2, February 2010

M. Albach (2009)
Modellierung induktiver Komponenten - Eine thematische Einführung
Vortrag im Rahmen des Cluster-Workshop "Induktivitäten in der Leistungselektronik", ECPE, Nürnberg, 29.10.2009

M. Albach (2009)
Die Simulation von Verlustmechanismen
Vortrag im Rahmen des Cluster-Workshop "Induktivitäten in der Leistungselektronik", ECPE, Nürnberg, 29.10.2009

D. Kübrich, M. Schmidt, T. Dürbaum (2009)
Prediction of the EMC behaviour of switch mode power supplies in boundary conduction mode including switching frequency limitations
EPE Power Electronics and Motion Control Conference, September 2009, Barcelona

C. Schildbach, D. Kübrich, T. Dürbaum (2009)
Averaged large signal model of boost power factor corrector in boundary conduction mode
EPE Power Electronics and Motion Control Conference, September 2009, Barcelona

N. Uddin, M. Spang, T. Mager, A. Thiede (2009)
Integrated Active Sensors for Near-Field Scanning
XV International Symposium on Theoretical Electrical Engineering (ISTET), June 2009, Lübeck, Germany

N. Uddin, M. Spang, T. Mager, A. Thiede (2009)
Integrated Active Near-Field Sensor in GaAs Technology
European Microwave Integrated Circuits Conference (EuMIC), September 2009, Rome, Italy

Best Student Presentation Award
A. Stadler, M. Albach, A. Lindner (2009)
A practical method to measure electrical AC conductivity of MnZn ferrites using conventional toroids
19th Soft Magnetic Materials Conference SMM19, September 2009, Torino, Italy

Best Student Paper Award
Ch. Schildbach (2009)
Automated Measurement Setup for the Control-to-Output Transfer Function of Power Factor Correctors
1st IEEE Germany Student Conference, 14./15. Juni 2009, Hamburg

A. Bucher, D. Kirchner, T. Duerbaum (2009)
An automatic approach for the extraction of data curves for magnetic materials
PCIM Conference, May 2009, Nuremberg, Germany

Best Paper Award
T. Fischer, G. Schubert, M. Albach (2009)
Influence of Adjacent Metal Cover Planes on EMC Filter Structures
International Symposium on Electromagnetic Compatibility, July 2009, Kyoto, Japan

T. Fischer, M. Albach, G. Schubert (2009)
Simulation of EMC-Filters applied in Automotive Electronic Control Units
CST European User Group Meeting, March 2009, Darmstadt

T. Mager, C. Reinhold, M. Spang, G. Schubert, T. Steinecke, C. Hedayat, T. Gessner (2009)
Electromagnetic Near-Field Scanning in Time and Frequency Domain for EMI Characterisation
Smart Systems Integration Conference, March 2009, Brussels, Belgium

M. Spang, M. Albach, N. Uddin, A. Thiede (2009)
Miniature Dipole Antenna for Active Near-Field Sensor
German Microwave Conference (GeMiC 2009), March 2009, München, Germany

T. Fischer, C. Kneuer, M. Albach, G. Schubert (2009)
Mutual Inductance of Capacitor Low-Pass Filters
20th International Zurich Symposium on Electromagnetic Compatibility, Zurich

T. Fischer, S. Oberneder, G. Schubert, M. Albach (2008)
Breitbandige Charakterisierung und Modellierung von EMV-Filtern im Automobilbereich
HF-Report, 22. Jahrgang, Nr. 4, November/Dezember 2008

M. Albach (2008)
Grundlagen der Elektrotechnik 1 2. Auflage, Erfahrungssätze, Bauelemente, Gleichstromschaltungen
Pearson Studium, 349 Seiten, ISBN 9783827373410

N. Uddin, M. Spang, A. Thiede (2008)
Integrated Magnetic Loop Probe in GaAs Technology for Active Near-Field Sensor
38th European Microwave Conference (EuMC), Oct. 2008, Amsterdam, The Netherlands

T. Mager, A. Tankielun, M. Spang, G. Schubert, T. Steinecke, W. John (2008)
Electromagnetic Near-Field Scanning in Time and Frequency Domain
Sophia Antipolis MicroElectronics (SAME) Conference, Oct. 2008, Sophia Antipolis, France

M. Spang, M. Albach (2008)
Optimized Winding Layout for Minimized Proximity Losses in Coils with Rod Cores
IEEE Transactions on Magnetics, vol. 44, issue 7, July 2008, pp. 1815-1821

A. Bucher, M. Schmid, L. Bendkowski and T. Duerbaum (2008)
Validation and Comparison of different PWM Converter Small Signal Models
EPE Power Electronics and Motion Control Conference, September 2008, Poznan

A. Bucher, M. Schmid, T. Duerbaum, D. Kuebrich (2008)
Consideration of Conduction Losses for the Series Resonant Converter by Means of a Simple Extension to the SPA Approach
EPE Power Electronics and Motion Control Conference, September 2008, Poznan

A. Bucher, T. Duerbaum, D. Kuebrich, S. Hoehne (2008)
Multi-Resonant LCC Converter - Comparison of Different Methods for the Steady-State Analysis
Power Electronics Specialists Conference PESC, June 2008, Rhodes

A. Bucher, T. Duerbaum, D. Kuebrich (2008)
Simple Extension to the State-Plane Analysis Approach for the Series Resonant Converter to Include Conduction Losses
PCIM Conference, May 2008, Nuremberg, Germany

A. Bucher, T. Duerbaum, D. Kuebrich (2008)
Automated Test Set-up for Efficiency Measurements of Switch Mode Power Supplies
PCIM Conference, May 2008, Nuremberg, Germany

A. Bucher, M. Schmid, L. Bendkowski, T. Duerbaum (2008)
Comparison of Different PWM Converter Small-Signal Models
PCIM Conference, May 2008, Nuremberg, Germany

N. Uddin, M. Spang, A. Thiede (2008)
Miniature Loop Antenna for Active Near-Field Sensor
German Microwave Conference (GeMiC 2008), March 2008, Hamburg, Germany

M. Spang, M. Albach, G. Schubert (2008)
Response of a Magnetic Loop Probe to the Current and Voltage on a Microstrip Line
IEEE EMC Symposium, August 2008, Detroit, Michigan

T. Fischer, M. Spang, M. Albach (2008)
Easy de-embedding of symmetrical coax-to-microstrip transitions
12th IEEE Workshop on Signal Propagationon Interconnects (SPI)
12 - 15 Mai 2008, Avignon, France

T. Fischer, S. Oberneder, G. Schubert, M. Albach (2008)
Breitbandige Charakterisierung und Modellierung von EMV-Filtern im Automobilbereich
Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, EMV 2008, März 2008, Düsseldorf, Deutschland

D. Kübrich, M. Schmid, T. Dürbaum (2007)
Analysis of a DSP-system in order to flexibly control a switch mode power supply
12th European Conference on Power Electronics and Applications - EPE 2007,
2 - 5 September 2007, Aalborg, Denmark

A. Bucher, T. Dürbaum, D. Kübrich (2007)
Comparison of Methods for the Analysis of the Parallel Resonant Converter with Capacitive Output Filter
12th European Conference on Power Electronics and Applications - EPE 2007,
2 - 5 September 2007, Aalborg, Denmark

S. Schuh, H. Roßmanith, M. Albach (2007)
Reduction of magnetic field strength on PCB level - Laboratory for power electronic students
12th European Conference on Power Electronics and Applications - EPE 2007,
2 - 5 September 2007, Aalborg, Denmark

H. Roßmanith, M. Albach (2007)
Fast and precise calculation of winding losses in P-, RM- and ETD-ferrite core inductors
2nd International Conference on Automotive Power Electronics - APE 2007,
Paris - Salons de l'Aveyron, 26 & 27 September 2007

A. Bucher, M. Albach, T. Dürbaum, D. Kübrich (2007)
Industrie-Schaltnetzgeräte im Test – Teil 3: elektromagnetische Verträglichkeit
Elektronik, Ausgabe 10/2007, p. 86 – 90

A. Bucher, M. Albach, T. Dürbaum, D. Kübrich (2007)
Industrie-Schaltnetzgeräte im Test – Teil 2: dynamische Eigenschaften
Elektronik, Ausgabe 09/2007, p. 72 – 78

M. Albach, A. Stadler, M.Spang (2007)
The Influence of Ferrite Characteristics on the Inductance of Coils With Rod Cores
IEEE Transactions on Magnetics, vol. 43, no.6, June 2007, p. 2618 - 2620

A. Bucher, M. Albach, T. Dürbaum, D. Kübrich (2007)
Industrie-Schaltnetzgeräte im Test – Teil 1: stationäre Eigenschaften
Elektronik, Ausgabe 08/2007, p. 56 – 65

T. Fischer, G. Schubert, M. Albach (2007)
Unified filter characterization and measurement with multiport blocks
International Conference On Electromagnetics In Advanced Applications (ICEAA 07), Torino, Italy

T. Fischer, G. Schubert, M. Albach (2007)
EMI of active Front Ends applied in the Automotive Industry
18th International Zurich Symposium on Electromagnetic Compatibility, Munich

M. Schmid, D. Kuebrich, M. Weiland, T. Dürbaum (2007)
Evaluation on the Efficiency of Power LEDs Driven with Currents Typical to Switch Mode Power Supplies
2007 IEEE Industry Applications Society Annual Meeting, New Orleans

T. Fischer, G. Schubert, M. Albach (2007)
Characterization of active circuits up to 1 GHz with respect to estimation of EMC behaviour
5th IASTED International Conference on Circuits, Signals, and Systems, July 2007, Banff, Canada

T. Fischer, M. Albach, G. Schubert (2007)
Accurate Impedance Characterization with a Vector Network Analyzer
VIIth International Symposium on Electromagnetic Compatibility and Electromagnetic Ecology, June 2007, St. Petersburg, Russia

M. Spang, M. Albach (2007)
Inductance of Coils with Rod Cores as a Function of Core Geometry and Winding Layout
PCIM Conference, May 2007, Nuremberg, Germany

M. Spang, T. Fischer, M. Albach, G. Schubert (2007)
Prediction and Measurement of Common Mode EMI influence on high side current measurements
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, D. Kübrich, M. Weiland, T. Dürbaum (2007)
Evaluation of power LEDs and their efficiency by driving them with currents typical to switch mode power supplies
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, A. Bucher, D. Kübrich, T. Dürbaum (2007)
Methods for the Analysis of the Parallel Resonant Converter with Capacitive Output Filter
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, D. Kübrich, T. Dürbaum (2007)
Investigation on a DSP-system to digitally control a switching power supply
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, M. Spang, T. Dürbaum (2007)
Implementation of a Pulse Generator for the Investigation of Dead-Time effects in Half-Bridges by a DSP system
PCIM Conference, May 2007, Nuremberg, Germany

M. Albach, A. Stadler, M.Spang (2006)
The Influence of Ferrite Characteristics on the Inductance of Coils with Rod Cores
10th Joint MMM/Intermag Conference, January 2007, Baltimore, Maryland, USA

A. Stadler, M. Albach, A. Bucher (2006)
Calculation of Core Losses in Toroids with Rectangular Cross Section
12th International Power Electronics and Motion Control Conference EPE-PEMC, September 2006, Portoroz, Slovenia, paper T2-407

A. Bucher, T. Dürbaum, D. Kübrich, A. Stadler (2006)
Comparison of Different Design Methods for the Parallel Resonant Converter
12th International Power Electronics and Motion Control Conference EPE-PEMC, September 2006, Portoroz, Slovenia, paper T2-404

D. Kübrich, T. Dürbaum, A. Bucher (2006)
Investigation of Turn-Off Behaviour under the Assumption of Linear Capacitances
PCIM Conference, May/June 2006, Nuremberg, Germany

A. Bucher, T. Dürbaum, D. Kübrich (2006)
Comparison of First Harmonic Approximation with exact Solution in case of a Series Resonant Converter
PCIM Conference, May/June 2006, Nuremberg, Germany

M. Schmid, T. Dürbaum, D. Kübrich (2006)
A Fast Calculation Tool for the Design of PFC Converters - Method and Application
PCIM Conference, May/June 2006, Nuremberg, Germany

M. Spang, D. Kübrich, T. Dürbaum (2006)
A Programmable Pulse Generator for the Investigation of Dead Time Effects in Half Bridges
PCIM Conference, May/June 2006, Nuremberg, Germany

A. Stadler, M. Albach (2006)
Analytical Calculation of Stray Fields Generated by Ferrite Rods in EMI Suppression Applications
PCIM Conference, May/June 2006, Nuremberg, Germany

S. Schuh, M. Albach (2006)
Influence of the Device Housing on Integrated Passives of Power Electronics
PCIM Conference, May/June 2006, Nuremberg, Germany

S. Schuh, M. Albach (2006)
EMC Shielding in Power Electronics Multilayers
Electrical Power Quality and Utilisation Journal, EPQU 2005, vol. XI, no. 2, pp. 57-63

A. Stadler, M. Albach, T. Dürbaum (2006)
Optimum EMC Design of Flyback and Load Resonant Converters Using Toroids with Air Gaps
Electrical Power Quality and Utilisation Journal, EPQU 2005, vol. XI, no. 2, pp. 15-22

A. Stadler, M. Albach (2006)
The Influence of the Winding Layout on the Core Losses and the Leakage Inductance in High Frequency Transformers
IEEE Transactions on Magnetics, vol. 42, no. 4, April 2006

M. Spang, G. Schubert (2006)
Modulanalyse unter Einbindung von messtechnisch bestimmten Black Box Modellen
Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, EMV 2006, März 2006, Düsseldorf, Deutschland

A. Stadler, M. Albach, H. Roßmanith, G. Schubert (2006)
EMV-Integration in den Layout-Prozess am Beispiel einer Kombination von Mikrostreifen- und Triplate-Leitungen
Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, EMV 2006, März 2006, Düsseldorf, Deutschland

S. Schuh, M. Albach (2006)
EMC Analysis of Planar PCB-Based Coils in the Vicinity of the Automobile Carriage
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, February 2006, Singapore,
paper 246

A. Stadler, M. Albach, H. Roßmanith, G. Schubert (2006)
The Influence of Ground and Floating Planes on the Electromagnetic Coupling Between Board Tracks
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, February 2006, Singapore,
paper 179

S. Schuh, M. Albach (2006)
EMC Shielding in Power Electronics Multilayers with Conductive Permeable Material
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, February 2006, Singapore,
paper 66

A. Stadler, M. Albach, H. Roßmanith, G. Schubert (2006)
Design Methodology to Limit Electromagnetic Coupling Between Board Tracks on PCB Level in Realtime
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, February 2006, Singapore,
paper 60

D. Kübrich, M. Schmid, T. Dürbaum (2005)
A fast calculation tool for the design of PFC converters - Method and application
31st Annual Conference of the IEEE Industrial Electronics Society IECON 2005, November 2005, North Carolina, USA

F. Kugler, M. Albach, S. Schuh, D. Kübrich (2005)
ESD laboratory for power electronics students
11th European Conference on Power Electronics and Applications EPE, Sep. 2005, Dresden, Germany,
paper 151

S. Schuh, M. Albach, R. Koch (2005)
A universal analytic model for planar coils with circular windings close to conductive-permeable foils
11th European Conference on Power Electronics and Applications EPE, Sep. 2005, Dresden, Germany,
paper 163

A. Stadler, M. Albach, F. Macary (2005)
The Minimization of Copper Losses in Core-less Inductors: Application to Foil- and PCB-based Planar Windings
11th European Conference on Power Electronics and Applications EPE, Sep. 2005, Dresden, Germany,
paper 200

A. Stadler, M. Albach, S. Chromy (2005)
The optimization of high frequency operated transformers for resonant converters
11th European Conference on Power Electronics and Applications EPE, Sep. 2005, Dresden, Germany,
paper 77

D. Kübrich, T. Dürbaum, K. Schetters (2005)
Mains harmonic reduction circuits using non linear inductances
11th European Conference on Power Electronics and Applications EPE, Sep. 2005, Dresden, Germany,
paper 207

A. Stadler, M. Albach, F. Macary (2005)
The Minimization of Copper Losses in Core-less Inductors: Application to Foil- and PCB-based Planar Windings
15th Conference on the Computation of Electromagnetic Fields Compumag, June 2005, Shenyang, Liaoning, China,
vol. 1, p. 218-219

A. Stadler, M. Albach, S. Chromy (2005)
The Optimization of High Frequency Operated Transformers with E-Cores
15th Conference on the Computation of Electromagnetic Fields Compumag, June 2005, Shenyang, Liaoning, China,
vol. 3, p. 72-73

T. Dürbaum, D. Kübrich, K. Schetters (2005)
Sensitivity analysis of air gap size of non linear inductance in passive mains harmonic reduction circuits
IEEE Power Electronics Specialists Conference PESC, June 2005, Recife, Brazil

S. Schuh, D. Kübrich, T. Dürbaum, F. Kugler (2005)
Teaching of ESD phenomena to power electronics students
IEEE Power Electronics Education Workshop PEEW, June 2005, Recife, Brazil,
paper 10725

M. Albach (2005)
Grundlagen der Elektrotechnik 2 , Periodische und nicht periodische Signalformen
Pearson Studium, ca. 270 Seiten, ISBN 3-8273-7108-2

D. Kübrich, T. Dürbaum, K. Schetters (2005)
Application of Non Linear Inductance in Passive Mains Harmonic Reduction Circuits
PCIM Conference, June 2005, Nuremberg, Germany, p. 69-74

A. Stadler, M. Albach, F. Macary (2005)
Minimum Loss Design for Core-Less Foil Inductors
PCIM Conference, June 2005, Nuremberg, Germany, p. 159-163

A. Stadler, M. Albach, S. Chromy (2005)
The Optimization of High Frequency Operated Transformers with E-Cores - Application to Resonant Converters
PCIM Conference, June 2005, Nuremberg, Germany, p. 228-233

S. Schuh, M. Albach, R. Koch (2005)
Planar Inductive Components in the Vicinty of Conductive, Permeable Material
PCIM Conference, June 2005, Nuremberg, Germany, p. 563-568

S. Schuh, M. Albach (2005)
EMC shielding of planar inductive components in power electronics multilayers with conductive permeable layers
4th International Workshop on Compatibility in Power Electronics, CPE 2005, June 2005, Gdynia, Poland, p. 126-128

A. Stadler, M. Albach, T. Dürbaum (2005)
The Minimization of Magnetic Stray Fields from Transformers with Air Gapped Toroids
4th International Workshop on Compatibility in Power Electronics, CPE 2005, June 2005, Gdynia, Poland, p. 123-125

A. Stadler, M. Albach, D. Kübrich (2005)
The Optimization of Transformers with Air Gapped Toroids
20th Annual Applied Power Electronics Conference, APEC 2005, Austin, Texas, p. 1938-1943,
paper 10356

T. Dürbaum, D. Kübrich, K. Schetters, A. Stadler (2005)
Influence of non linear magnetic inductance in passive mains harmonic reduction circuits
20th Annual Applied Power Electronics Conference, APEC 2005, Austin, Texas, p. 1170-1175,
paper 10731

M. Albach (2004)
Grundlagen der Elektrotechnik 1, Erfahrungssätze, Bauelemente, Gleichstromschaltungen
Pearson Studium, ca. 300 Seiten, ISBN 3-8273-7106-6

T. Dürbaum, T. Lopez, R. Elferich, N. Koper, T. Tolle (2004)
Third Quadrant Output Characteristics in High Density Trench MOSFETs
11th International Power Electronics and Motion Control Conference EPE-PEMC, September 2004, Riga, Latvia,
paper A14370

A. Stadler, M. Albach, S. Chromy (2004)
The Minimization of Magnetic Stray Fields from UI-Cores with Air Gaps
11th International Power Electronics and Motion Control Conference EPE-PEMC, September 2004, Riga, Latvia,
paper A101452

Best Poster Award
S. Schuh, M. Albach (2004)
Planar PCB-based transformers - Method of calculation and design study
11th International Power Electronics and Motion Control Conference EPE-PEMC, September 2004, Riga, Latvia,
paper A19378

H. Roßmanith, T. Burghart, LS. EMF, G. Schubert, Conti Temic Microelectronic GmbH, (2004)
Evaluating the RF-Emissions of Automotive Cable Harness
IEEE Symposium on Electromagnetic Compatibility, August 2004, Santa Clara, USA, p. 787-791

M. Albach, A. Stadler (2004)
The Minimization of Magnetic Stray Fields from Toroids with Air Gaps
IEEE Symposium on Electromagnetic Compatibility, August 2004, Santa Clara, USA, p. 881-886

T. Dürbaum, K. Rigbers, S. Schröder, M. Wendt, R. W. De Doncker (2004)
Integrated Method for Optimization of Power Electronic Circuits
IEEE Power Electronics Specialists Conference PESC, June 2004

T. Dürbaum, T. Lopez, G. Sauerländer, T. Tolle (2004)
Comparison between resonant and conventional gate drivers in ZVS applications
PCIM Conference, May 2004, Nuremberg, Germany, p. 960-965

S. Schuh, LS. EMF, E. Waffenschmid, B. Ackermann, Philips GmbH, E. Langkabel, Isola AG, M. Wille, Ruwel AG, H. Marczinske, Straschu Leiterplatten GmbH, (2004)
Integral Manufacturing of Embedded Passive Integrated Circuits for Power Electronics
PCIM Conference, May 2004, Nuremberg, Germany, p. 848-853

S. Schuh, M. Albach, LS. EMF, E. Waffenschmid, Philips GmbH, (2004)
A New Characterisation Method for Ferrite Polymer Compound
PCIM Conference, May 2004, Nuremberg, Germany, p. 711-715

T. Dürbaum, T. Lopez, T. Tolle, R. Elferich (2004)
PCB Layout Inductance Modeling Based on a Time Domain Measurement Approach
19th Annual Applied Power Electronics Conference, APEC 2004.

S. Schuh, LS. EMF, E. Waffenschmid, Philips GmbH, E. Langkabel, Isola AG, J.-D. Büsselmann, Straschu Leiterplatten, M. Wille, Ruwel AG, H. Marczinske, Straschu Leiterplatten GmbH, (2003)
3D-Integration in der Leistungselektronik: Neue Perspektiven für die Elektronikfertigung von morgen
BMBF Chipworkshop 2003, Dezember 2003, Berlin

S. Schuh, LS. EMF, E. Waffenschmid, Philips GmbH, E. Langkabel, Isola AG, J.-D. Büsselmann, Straschu Leiterplatten, M. Wille, Ruwel AG, H. Marczinske, Straschu Leiterplatten GmbH, (2003)
3D-Integration in der Leistungselektronik: Integrierte Bauelemente - Materialien und Herstellung
11. FED-Konferenz, Ludwigsburg, September 2003. Vortragsband Elektronik-Design, p. 538-552

S. Voss, (2003)
Equivalent Circuit Modelling for HF-Transformers
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, Toulouse, France,
paper 9

S. Schuh, M. Albach, (2003)
Magnetic field distribution in embedded passive integrated circuits
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, Toulouse, France,
paper 10

T. Dürbaum, T. Lopez, G. Sauerländer, T. Tolle, (2003)
A Detailed Analysis of a Resonant Gate Driver for Frequency Control Applications
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, Toulouse, France,
paper 842

T. Dürbaum, T. Tolle, R. Elferich, T. Lopez, (2003)
Quantification of Switching Loss Contributions in Synchronous Rectifier Applications
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, Toulouse, France,
paper 786

T. Dürbaum, G. Sauerländer, (2003)
AM Compatible Switch Mode Power Supply For Compact Audio Sets
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, Toulouse, France,
paper 271

T. Dürbaum, T. Tolle, R. Elferich, (2003)
Switching loss contributions of synchronous rectifiers in VRM applications
IEEE Power Electronics Specialists Conference PESC, June 2003, vol. 1, p. 144-149

M. Albach, H. Roßmanith, (2003)
Teaching Coupling Mechanisms - A Case Study
IEEE Symposium on Electromagnetic Compatibility, Aug. 2003, Boston, USA, vol. 1, p. 160-165

Best Symposium Paper Award
T. Fischer, M. Leone, M. Albach, (2003)
An analytical model for studying the electromagnetic radiation of power-bus structures
IEEE Symposium on Electromagnetic Compatibility, Boston, USA, vol. 1, p. 225-230, Aug. 2003

T. Dürbaum, R. Elferich, T. Tolle, (2003)
De-embedding of Reverse Recovery Losses in Fast Switching VRM Applications
18th Annual Applied Power Electronics Conference, APEC 2003

T. Dürbaum, T. Lopez, G. Sauerländer, T. Tolle, (2003)
A Detailed Analysis of a Resonant Gate Driver for PWM Applications
18th Annual Applied Power Electronics Conference, APEC 2003

M. Albach, S. Schuh, (2003)
Analysis of embedded passives integrated circuits for power converters
ZM Communications GmbH Nuremberg, Germany: PCIM Conference, May 2003, Nuremberg, Germany,
S. Seminar PE 2-1

M. Leone, T. Fischer, M. Albach, (2003)
Investigation of the radiation from parallel-plane power-bus structures on printed circuit boards
Electrical Engineering, vol. 85, Number 2, p. 113 - 118, May 2003

S. Voss, M. Albach, (2003)
Analytical Calculation of Winding Capacitances in Transformers
INTERMAG Conference, March/April 2003, Boston, USA

S. Voss, (2002)
Equivalent circuit modelling for hf-transformers
2nd EPE International Conference on Electrical and Power Engineering, November 2002, Buletinul Institutului Politehnic din Iasi, Sectia III (Electrotehnica, Energetica, Electronica), vol. C, p. 15-20, Iasi, Romania

S. Schuh, LS. EMF, B. Ackermann, E. Waffenschmid, Philips GmbH, E. Langkabel, Isola AG, H. Marczinske, Straschu Leiterplatten GmbH, M. Wille, Ruwel, Werk Schöller, Spezialfabrik für Leiterplatten, (2002)
Embedded passive circuits for power converters
International Workshop on Technology and Production Processes for Flexible Electronic Systems, November 2002, Munich, Germany

M. Albach, D. Kübrich, T. Brehm, (2002)
Coupling Mechanisms - EMC experiment demonstrations
IEEE International Symposium on Electromagnetic Compatibility, August 2002, Minneapolis, USA

T. Dürbaum, R. Elferich, (2002)
A new Load-Resonant Dual-Output Converter Topology
33rd Annual IEEE Power Electronics Specialists Conference, PESC 2002, 1319

T. Dürbaum, (2002)
Design procedure for load resonant converters using integrated magnetics
45th European Conference on Power Electronics, Drives and Motion, PCIM 2002, 341 pp.

T. Dürbaum, G. Sauerländer, (2002)
Description Of Transformer Leakage By Introduction Of An AL-Value
45th European Conference on Power Electronics, Drives and Motion, PCIM 2002, 209 pp.

T. Dürbaum, R. Elferich, (2002)
A New Resonant DC-DC Converter For Consumer Electronic Applications
45th European Conference on Power Electronics, Drives and Motion, PCIM 2002, 119 pp.

M. Albach, (2002)
Design of Magnetic Components
Seminar 21, PCIM Conference, May 2002, Nuremberg, Germany

H. Roßmanith, M. Albach, (2002)
Design of Magnetic Components
PCIM Tutorial 4, March 2002, Shanghai, China

T. Dürbaum, T. Tolle, (2001)
Modelling of ZVS Transitions in Asymmetrical Half-Bridge PWM Converters
32nd Annual IEEE Power Electronics Specialists Conference, PESC 2001, vol. 1, 308 pp.

T. Dürbaum, T. Tolle, (2001)
Modelling of the Asymmetrical Half-Bridge with Single Diode Output
9th European Conference on Power Electronics and Applications EPE, Aug. 2001, Graz, Austria

P. Horst, M. Albach, (2001)
The influence of the non-linear ferrite characteristics on the attenuation of power line filters
9th European Conference on Power Electronics and Applications EPE, Aug. 2001, Graz, Austria

S. Voss, H. Roßmanith, M. Albach, (2001)
The influence of air gap position and winding position on the inductance in high frequency transformers
9th European Conference on Power Electronics and Applications EPE, Aug. 2001, Graz, Austria

M. Albach, H. Roßmanith, (2001)
The influence of air gap size and winding position on the proximity losses in high frequency transformers
32nd IEEE Power Electronics Specialists Conference PESC, June 2001, Vancouver, Canada,
paper 10260

T. Dürbaum, G. Sauerländer, (2001)
Energy based capacitance model for magnetic devices
16th Annual Applied Power Electronics Conference, APEC 2001, vol. 1, 109 pp.

M. Albach, (2001)
Design of Magnetic Components
Seminar 24, PCIM Conference, June 2001, Nuremberg, Germany

M. Albach, A. Ortner, (2001)
Optimierte Entstörung für Hörfunkempfänger - Reduzierung von Magnetfeldern durch ´Buried Jumper´ - Technologie
EMC-Kompendium 2001, publish-industry Verlag, p. 185-187

T. Dürbaum, (2000)
Capacitance model for magnetic devices
31st IEEE Power Electronics Specialists Conference PESC, June 2000, Galway, Ireland, vol. 3, 1651 pp.

M. Albach, (2000)
Two-dimensional calculation of winding losses in transformers
31st IEEE Power Electronics Specialists Conference PESC, June 2000, Galway, Ireland, paper 41.4, p. 1639-1644

M. Albach, T. Dürbaum, G. Sauerländer, M. Ossmann, T. Tolle, (2000)
Common Mode Noise Generated by Magnetic Components - Experimental Test Set-up and Measurement Results
31st IEEE Power Electronics Specialists Conference PESC, June 2000, Galway, Ireland, paper 25.1, p. 911-915

T. Dürbaum, T. Tolle, R. Elferich, (2000)
Capacitance Model for Flyback Transformers
41st European Conference on Power Electronics, Drives and Motion, PCIM 2000, 361 pp.

M. Albach, (2000)
Design of Magnetic Components
Seminar 25, 41st European Conference on Power Electronics, Drives and Motion, PCIM 2000

T. Dürbaum, (1999)
Layer Based Capacitance Model for Magnetic Devices
8th European Power Electronics Conference EPE, Sep. 1999, Lausanne, Switzerland published on CD

M. Albach, G. Sauerländer, (1999)
Reduction of magnetic field strength generated by a switched mode power supply
8th European Power Electronics Conference EPE, Sep. 1999, Lausanne, Switzerland Session D.3

1. Juli 1999 Lehrstuhlgründung

T. Dürbaum, T. Tolle, (1999)
Capacitor Coupled, Low Cost, Voltage Step-Down Rectifier
39th European Conference on Power Electronics, Drives and Motion, PCIM’99, 395 pp.

T. Dürbaum, G. Sauerländer, (1998)
First harmonic approximation including design constraints
INTELEC’98, 321 pp.

T. Dürbaum, G. Sauerländer, (1998)
Optimisation of the Transformer Turns Ratio by means of the First Harmonic Approximation
19th European Conference on Power Electronics, Drives and Motion, PCIM’98, 681 pp.

T. Dürbaum, G. Sauerländer, (1997)
Analysis of the series-parallel multiresonant LLC converter - comparison between first harmonic approximation and measurement
7th European Power Electronics Conference EPE, Sep. 1997, Trondheim, Norway, vol. 2, 174 pp.

M. Albach, J. Lauter, (1997)
The Winding Capacitance of Solid and Litz Wires
7th European Power Electronics Conference EPE, Sep. 1997, Trondheim, Norway, p. 2.001-2.005

A. Brockmeyer, M. Albach, T. Dürbaum, (1996)
Remagnetization Losses of Ferrite Materials used in Power Electronic Applications
International Conference on Power Electronics Drives and Motion PCIM, Nuremberg, Germany, p. 387 - 394

M. Albach, T. Dürbaum, A. Brockmeyer, (1996)
Calculating Core Losses in Transformers for Arbitrary Magnetizing Currents - A Comparison of Different Approaches
IEEE Power Electronics Specialists Conference PESC, Baveno, Italy, p.1463 - 1468

M. Albach, (1995),
Flyback Converter with Capacitively Coupled Boost Power Stage
6th European Power Electronics Conference EPE, Sep. 1995, Sevilla, Spain, p. 3.362 - 3.367

T. Dürbaum, M. Albach, (1995)
Core Losses in Transformers with an Arbitrary Shape of the Magnetizing Current
6th European Power Electronics Conference EPE, Sep. 1995, Sevilla, Spain, p. 1.171 - 1.176

A. Brockmeyer, M. Albach, (1995)
Analytical Representation of the Magnetization-Curve of Soft Ferrites and its Temperature Dependence
International Conference on Power Electronics Drives and Motion PCIM, June 1995, Nuremberg, Germany, p. 187 - 197

M. Albach, (1993)
High Frequency Interferences - Standards, Problems and Solutions
Vortrag im Rahmen eines einwöchigen Kurses ´Harmonics and Electromagnetic Interferences´
University Aachen, Germany

M. Albach, (1993)
How to avoid filters in off-line power supplies
5th European Power Electronics Conference EPE, Brighton, UK, vol. 3, p 52 - 57

M. Albach, D. Dambois, (1991)
Optimized operation mode for 3 kW off-line preconditioner circuits
4th European Power Electronics Conference EPE, Florenz, Italy, vol. 3, p. 134 -139

M. Albach, (1989)
Power supply for 2 kW halogen lamp with continuous power control and sinusoidal input current
Fifth International Symposium on the Science & Technology of Light Sources, York, UK, p. 151 - 152

M. Albach, (1989)
An ac-dc converter with low mains current distortion and minimized conducted emissions
3rd European Power Electronics Conference EPE, Aachen, Germany, vol. 1, p. 457 - 460

M. Albach, (1988)
Störprobleme bei Schaltnetzteilen
Philips - Unsere Forschung in Deutschland Band IV, S. 266-269

M. Albach, (1986)
Conducted interference voltage of ac-dc converters
IEEE Power Electronics Specialists Conference PESC, Vancouver, Canada, p. 203 - 212

M. Albach, (1985)
RF interference from switched mode power supplies
Philips Research Newsletter 106

M. Albach, L. Hannakam, (1984)
Leitende elliptische Zylinder hoher Permeabilität im Felde einer Doppelleitung
Arch. Elektrotechnik, vol. 67, p. 39 - 48

M. Albach, L. Hannakam, (1983)
Bestimmung induzierter Wirbelströme in Körpern hoher Permeabilität nach dem Differenzen-verfahren
Arch. Elektrotechnik, vol. 66, p. 67 - 74

M. Albach, E. Nolle, (1983)
Sprungförmige Änderung der Leitfähigkeit auf einer schrägen Begrenzungsfläche
Arch. Elektrotechnik, vol. 66, p. 37 - 42

M. Albach, L. Hannakam, (1982)
Kraftverhältnisse und Stabilität einer elektromagnetischen Schwebeanordnung
Arch. Elektrotechnik, vol. 65, p. 293 - 297

L. Hannakam, M. Albach, (1982)
Lösung des Randwertproblems bei Anwesenheit leitender Körper hoher Permeabilität im erregenden magnetischen Wechselfeld
Arch. Elektrotechnik, vol. 65, p. 117 - 122

M. Albach, (1982)
Beitrag zur Kapazitätsberechnung bei beidseitig beschichteten Dielektrika
Arch. Elektrotechnik, vol. 64, p. 357 - 362

M. Albach, L. Hannakam, (1982)
Stromverteilung und Verluste in mehreren zylindrischen Massivleitern rechteckförmigen Querschnittes
Arch. Elektrotechnik, vol. 64, p. 285 - 288

M. Albach, U. Hanses, (1981)
Zur Bemessung von Grundwasser-Entspannungslöchern in wasserdruckbelasteten Bauwerkssohlen - Eine potentialtheoretische Lösung
Die Bautechnik 10, p. 341 - 344

M. Albach, L. Hannakam, (1981)
Berechnung der Wirbelströme in einer leitenden Kreisscheibe und einer dünnen Platte
Arch. Elektrotechnik, vol. 64, p. 221 - 227

E. Nolle, M. Albach, (1981)
Widerstandsänderung bei kreiszylindrischen und langgestreckten Massivleitern als Folge von Querschnittsänderungen
Arch. Elektrotechnik, vol. 64, p. 171 - 176

M. Albach, L. Hannakam, (1981)
Induzierte Wirbelströme in einer Kreisscheibe und in einem Rechteckzylinder endlicher Höhe
Arch. Elektrotechnik, vol. 64, p. 127 - 134

M. Albach, L. Hannakam, (1981)
Analytische Bestimmung der Induktivitäten einer Drehfeldmaschine mit offenen Nuten
Arch. Elektrotechnik, vol. 63, p. 285 - 292

L. Hannakam, M. Albach, (1980)
Leitende Zylinder im Felde senkrecht zu den Stirnseiten verlaufender erregender Leiter
Arch. Elektrotechnik, vol. 62, p. 335 - 342

L. Hannakam, M. Albach, (1980)
Analytische Bestimmung der Hauptreaktanzen und des Drehmomentes eines Reluktanzmotors
Arch. Elektrotechnik, vol. 62, p. 265 - 273

L. Hannakam, M. Albach, (1980)
Widerstandserhöhung eines zylindrischen Leiters infolge einer exzentrischen Querschnittseinengung endlicher Länge
Arch. Elektrotechnik, vol. 62, p. 117 - 123

Nach oben